Every clever and crafty tinkerer knows that sometimes there is just the right trick to make something work. When one of our reliable and necessary devices all of a sudden lets us down – the battery goes bad, the on/off toggle stops working, the bulb is out – it seems that there is always one little change that a master handyman can do to get it going again. When it comes to batteries, in particular, there are a few tricks that you may not know that will help you to become an expert fixer-upper in the case of a bad battery or mysterious malfunctioning.

Batteries are notorious for being a pain to deal with, but whether we like it or not, a good deal of the devices in our lives depend on battery power to function properly. Our mobile phones, laptops, radios, vacuum cleaners and even cars depend on full charge to perform at their best. Unfortunately for us, batteries are sensitive to light, heat, water, motion, and age, so there is bound to come a time when your battery is not doing what it is supposed to. Thankfully there are a few tricks that you ought to have up your sleeves in times like those so that you will save money and time on battery replacement and problem diagnosis.

Heating and Cooling: Restoring Batteries from the Dead

If a battery in one of your household devices is all of a sudden not holding a charge like it used to, not powering your item correctly, or otherwise malfunctioning, an age old method of boosting it back up to full speed again is chilling it for 24-48 hours. You can do this by removing the battery from your device, wrapping it in plastic wrap, putting it into a closed bag and placing it into your freezer for a day or two. This chilling method will work on rechargeable batteries, such as those you might have in your mobile phone, flashlight or camera. The cold air gives the battery enough juice to come back up to full power when it is removed from the freezer and charged. Be sure to run down your battery to a low or fully dead level before placing it in the freezer.

Did water damage get the best of you after you sent your mobile phone or MP3 music device sailing into the depths of the washer or toilet? If there is any hope at all for your device, it will probably come from drying the battery out immediately in a warm oven. If your battery has sustained contact with the water, remove it and place it on a baking sheet in an oven at a very low temperature for up to several hours, as if you were dehydrating something. When you remove it from the oven, try then placing it into a bag of rice or other solid grain that will work to intake the moisture from the battery (or even the whole device) even more, and leave it there for 1-3 days. These two methods will likely prevent you from having to purchase a brand new battery, or even a brand new device altogether.

Finally, if you are struggling with batteries holding their charge and want to ensure a long life for your rechargeable batteries, make sure that you let your batteries run down to almost empty or empty on a regular basis. This practice is far better for your batteries than having them be fully charged all of the time. You will save big on battery replacement and get more use out of all your battery powered devices if you let them run down at least once a month. If you find you do have to replace your batteries but are short on cash, turn to kangaroopaydayloans.com for help.

This is a Sponsored post written by me on behalf of GRPH for SocialSpark. All opinions are 100% mine.

I have to admit. Even I  do not find graphite quite attractive. When it comes to minerals, gold and silver come to mind right away. However, graphite is used in so many things.

Take batteries for example. Yes. The use of graphite in batteries has been increasing in the last 3 decades. The Li-ion battery utilizes more graphite than lithium carbonate.

Now, would you believe that graphite is used in most devices today? Hard to believe but true. The use of lithium ion battery has really taken off.

Graphite is one of the most important raw materials in modern electronics and industry. Despite that, The United States has not produced graphite in over 20 years. All of it is imported.

Photobucket

But things are going for the better. For the first time in more than 20 years, America is about to produce its own graphite. Not too soon, either and this is a good sign for America’s economy. It always is a good sign when you do not import from others.

Graphite Corporation aims to be at the center of the graphite attention. Having an American entity that produces graphite for the whole nation to use compared to importing graphite from other countries can benefit America immensely.

Considering that Graphite Corp. will become a major player in the American graphite industry, there is an opportunity to invest. Check out the Industry Growth Report Newsletter to find more details about it!

Visit Sponsor's Site

Well, I added a word after the post title because I was very disappointed with this app. It keeps turning on my cellular data even though I set it to off.

Because of this, I give this app a zero rating. I am worried how much data usage my account used up. Who knows if my phone’s app kept retrieving data while I was asleep. Sheesh. This is a big troublesome problem for me. I just hope the bill ain’t big.

Even though I chose the normal configuration of the app, it still turned on my cellular data. It is weird because the description says it won’t change any settings and all strategies applied to it based on other options of Easy Battery Saver will be cancelled. But they ain’t.

This app is good only for those who have an unlimited data plan since who cares how much data is consumed by the smart phone right?

In my case, I only depend on WIFI for Internet access hence this app really sucks. I decided to uninstall it rather than risk getting charged for who knows how much.

Related Posts Plugin for WordPress, Blogger...